Skip to main content
Centrifugal fans 
medium pressure
.

Medium pressure industrial fans are suitable for the suction of dusty air containing various types of materials in suspension and for the transportation of harmful air with with low and medium pressure.

The series

EU Series

Low and medium-pressure centrifugal fan with high efficiency and low-noise reverse-blade impeller. Direct driven. These fans are characterized by a very flat curve of the absorbed power, in order not to overload the motor neither when working with open inlets. 

Use:

suction of dusty air containing various types of materials in suspension, in joineries for transporting saw dust and wooden shavings, excluding filamentous material, in mechanical industries for sucking in metal chips, in pneumatic transportation of the cement factories, ceramic factories, mills, fodder factories, tanneries, foundries, in textile and chemical industries and in general.

Temperature:

the temperature of the fluid transported must not exceed 80°C without cooling fan and 150° C with cooling fan. For higher temperatures it is necessary to modify the construction of the fan.

EUC Series

Low and medium-pressure centrifugal fan with high efficiency and low-noise reverse-blade impeller. Belt driven. Idoneo al trasporto di materiale in miscela con l'aria. These fans are characterized by a very flat curve of the absorbed power, in order not to overload the motor neither when working with open inlets. 

Use:

suction of dusts, mists, granulates, wooden shavings of minimum sizes and materials in general mixed with air excluding filamentous material; suitable in carpenter shops, mechanical industries, cement factories, ceramic factories, tanneries , foundries, in the mill and chemical industries, and in all those applications where it is necessary to transportation harmful air with maximum temperature of 90°C.

Temperature:

for temperatures of the transported fluid higher than 90°C up to 350°C a small heat stopping fan is splined to the shaft between support and scroll; the fan is painted with a special aluminum varnish suitable for high temperatures.

EUM Series

Low and medium-pressure centrifugal fan, high efficiency, and low-noise reverse-blade impeller. directly coupled motor. The main feature of these types of fans is the association of high output (deriving from the use of a rotor with reversed blades, special profile), with the suction of dusty fluids or those containing granular materials. These fans are characterized by a very flat curve of the absorbed power, in order not to overload the motor neither when working with open inlets.

Use:

for suction of dusty air containing various types of materials in suspension. They are applied in joineries for transporting saw dust and wooden shavings, excluding filamentous material, in mechanical industries for the suction of metal chips, in pneumatic transportation of the cement factories, ceramic factories, mills, fodder factories, tanneries, foundries, in textile and chemical industries and in general in all those applications where it is necessary to transportation harmful air with low and medium pressure. 

Temperature:

80°C maximum and up to 150° C with cooling fan. For higher temperatures it is necessary to make some changes on the construction of the fan.

EUMC Series

Low and medium-pressure centrifugal fan with special blade impeller. Belt driven. These fans are characterized by a very flat curve of the absorbed power, in order not to overload the motor neither when working with open inlets.

Use:

suitable for transportation systems, suction systems, forced suction chimneys, transportation of granulated material and sawdust mixed with air, excluding filament material.
They are assembled in carpenter shops, mechanical industries, cement factories, ceramic factories, tanneries, foundries, in the mill and chemical industries, and in all those applications where it is necessary to transportation harmful air with maximum temperature of 90°C.

Temperature:

maximum 90°C and up to 350°C a small heat stopping fan is splined to the shaft between support and scroll; besides, the fan is painted with a special aluminum varnish suitable for high temperatures.

EUK Series

Medium and high-pressure centrifugal fan, high efficiency, and low-noise reverse-blade impeller. Direct driven. The main feature of these new type of fans is the match of high output (deriving from the use of a rotor with reversed blades, special profile), with the suction of dusty fluids or granular materials. Besides, these fans are characterized by a very flat curve of the absorbed power, to not overload the motor neither when working with open inlets.

Use:

suction of dusty air containing various types of materials in suspension. They are installed in joineries for transporting saw dust and wooden shavings, excluding filamentous material, in mechanical industries for the suction of metal chips, in pneumatic transportation of the cement factories, ceramic factories, mills, fodder factories, tanneries, foundries, in textile and chemical industries and in all those applications where it is necessary to transportation harmful air with low and medium pressure.

 

Temperature:

80°C maximum and up to 150° C with cooling fan. For higher temperatures it is necessary to make some changes on the construction of the fan.

EUKC Series

Medium and high-pressure centrifugal fans, high efficiency and low-noise, reverse-blade impeller. Belt driven. These fans are characterized by a very flat curve of the absorbed power, to not overload the motor neither when working with open inlets.

Use:

suction of dusty air containing various types of materials in suspension. They are installed in joineries for transporting saw dust and wooden shavings, excluding filamentous material, in mechanical industries for the suction of metal chips, in pneumatic transportation of the cement factories, ceramic factories, mills, fodder factories, tanneries, foundries, in textile and chemical industries and in all those applications where it is necessary to transportation harmful air with medium and high pressure.

Temperature:

90°C maximum and up to 350°C with cooling fan; the fan is painted with a special aluminium varnish suitable for high temperatures.

MPR Series

Low and medium-pressure centrifugal fan with backward-blade impeller, high-efficiency, and low-noise. Direct driven. These fans are characterized by a very flat curve of the absorbed power, to not overload the motor neither when working with open inlets.

Use:

suction of dusty air containing various types of materials in suspension. They are installed in joineries for transporting saw dust and wooden shavings, excluding filamentous material, in mechanical industries for the suction of metal chips, in pneumatic transportation of the cement factories, ceramic factories, mills, fodder factories, tanneries, foundries, in textile and chemical industries and in all those applications where it is necessary to transportation harmful air with low and medium pressure.

Temperature:

80°C maximum and up to 150° C with cooling fan. For higher temperatures it is necessary to make some changes on the construction of the fan.

MPRC Series

Low and medium-pressure centrifugal fan with backward-blade impeller, high-efficiency, and low-noise. Belt driven. These fans are characterized by a very flat curve of the absorbed power, to not overload the motor neither when working with open inlets.

Use:

suction of dusty air containing various types of materials in suspension. They are installed in joineries for transporting saw dust and wooden shavings, excluding filamentous material, in mechanical industries for the suction of metal chips, in pneumatic transportation of the cement factories, ceramic factories, mills, fodder factories, tanneries, foundries, in textile and chemical industries and in all those applications where it is necessary to transportation harmful air with low and medium pressure.

Temperature:

90°C maximum and up to 350°C with cooling fan; the fan is painted with a special aluminum varnish suitable for high temperatures.

TF Series

Medium and high-pressure centrifugal fans, open-blade impeller. Direct driven. Revolvable. This type of fans may also be used as paper shredders of high reliability, by applying a particular adapter to the fan wheel without influencing the air characteristics. Contact the technical department for further information.

Use:

for the suction of dusty air containing various types of materials. These fans are suitable for the transportation of sawdust and of wood chips, in the tanneries for the transportation of leather trimmings and shavings, in the bookbinderies for the transportation of paper trimmings, in the textile industries for the transportation of yarn waste and of long filaments, in plastic industries for the transportation of granulates and of nylon trimmings; for the loading of solid combustibles into boilers, etc.

 

Temperature:

80°C maximum.

TFC Series

Medium and high-pressure centrifugal fan, open-blade impeller. Belt driven. Revolvable. This type of fans may also be used as paper shredders of high reliability, by applying a particular adapter to the fan wheel without influencing the air characteristics. Contact the Technical Department for further information.

Use:

for the suction of dusty air containing various types of materials. These fans are suitable for the transportation of sawdust and of wood chips, in the tanneries for the transportation of leather trimmings and shavings, in the bookbinderies for the transportation of paper trimmings, in the textile industries for the transportation of yarn waste and of long filaments, in plastic industries for the transportation of granulates and of nylon trimmings; for the loading of solid combustibles into boilers, etc.

Temperature:

90°C maximum.

TG Series

Medium and high-pressure centrifugal fans, open-blade impeller. Direct driven. Revolvable. This type of fans may also be used as paper shredders of high reliability, by applying a particular adapter to the fan wheel without influencing the air characteristics. Contact the technical department for further information.

Use:

for the suction of dusty air containing various types of materials. These fans are suitable for the transportation of sawdust and of wood chips, in the tanneries for the transportation of leather trimmings and shavings, in the bookbinderies for the transportation of paper trimmings, in the textile industries for the transportation of yarn waste and of long filaments, in plastic industries for the transportation of granulates and of nylon trimmings; for the loading of solid combustibles into boilers, etc.

Temperatura:

80°C maximum.

TGC Series

Medium and high-pressure centrifugal fans, open-blade impeller. Belt driven. Revolvable. This type of fans may also be used as paper shredders of high reliability, by applying a particular adapter to the fan wheel without influencing the air characteristics. Contact the technical department for further information.

Use:

for the suction of dusty air containing various types of materials. These fans are suitable for the transportation of sawdust and of wood chips, in the tanneries for the transportation of leather trimmings and shavings, in the bookbinderies for the transportation of paper trimmings, in the textile industries for the transportation of yarn waste and of long filaments, in plastic industries for the transportation of granulates and of nylon trimmings, for the loading of solid combustibles into boilers, etc.

 

Temperature:

90°C maximum.

TH Series

Medium and high-pressure centrifugal fan, open-blade impeller. Direct driven. Revolvable.

Use:

for the suction of dusty air containing various types of materials. These fans are suitable for the transportation of sawdust and of wood chips, in the tanneries for the transportation of leather trimmings and shavings, in the bookbinderies for the transportation of paper trimmings, in the textile industries for the transportation of yarn waste and of long filaments, in plastic industries for the transportation of granulates and of nylon trimmings; for the loading of solid combustibles into boilers, etc.

Temperature:

80°C maximum.

THC Series

Medium and high-pressure centrifugal fan, open-blade impeller. Belt driven. Revolvable.

Use:

for the suction of dusty air containing various types of materials. These fans are suitable for the transportation of sawdust and of wood chips, in the tanneries for the transportation of leather trimmings and shavings, in the bookbinderies for the transportation of paper trimmings, in the textile industries for the transportation of yarn waste and of long filaments, in plastic industries for the transportation of granulates and of nylon trimmings, for the loading of solid combustibles into boilers, etc.

Temperature:

90°C maximum and up to 250°C with cooling fan.

TPA Series

Low and medium-pressure centrifugal fan with open-blade impeller. Revolvable. Direct driven.

Use:

for the suction of dusty air containing various types of materials. This type of fans is mainly installed in the joinery for the transportation of saw dust and wooden shavings, in the tanneries for the transportation of trimmings and leather shavings, in the plastic industries for the transportation of granulates. 

 

Temperature:

80°C maximum.

TPALC Series

Low and medium-pressure centrifugal fan with open-blade impeller. Revolvable. Belt driven.

Use:

for the suction of dusty air containing various types of materialsThe TPALc conveying type is suitable for the transportation of filament material, and it is constructed especially for the textile industry such as wool mills and where it is used for transporting wool, rags, lint, waddings.

 

Temperature:

90°C maximum.

TQ Series

Medium-pressure centrifugal fan with open-blade impeller. Revolvable. Direct driven.

Use:

this type of fans is mainly used in the joineries for the transportation of saw dust and wooden shavings; in the tanneries for the transportation of trimmings and leather shavings; in the plastic industries for the transportation of granulates.

Temperature:

80°C maximum.

TR Series

Low and medium-pressure centrifugal fan with backward-blade impeller, high-efficiency, and low-noise. Direct driven. These fans are characterized by a very flat curve of the absorbed power, in order not to overload the motor neither when working with open inlets.

Use:

suction of dusty air containing various types of materials in suspension. They are installed in joineries for transporting saw dust and wooden shavings, excluding filamentous material, in mechanical industries for the suction of metal chips, in pneumatic transportation of the cement factories, ceramic factories, mills, fodder factories, tanneries, foundries, in textile and chemical industries and in all those applications where it is necessary to transportation harmful air with low and medium pressure.

Temperature:

80°C maximum and up to 150°C with cooling fan. For higher temperatures it is necessary to make some changes on the construction of the fan.

TRC Series

Low and medium-pressure centrifugal fan, high-efficiency impeller with special profile blades. Belt driven.

Use:

suitable for the suction of dusts, fumes, granulates, sawings or also wooden shavings of minimum sizes and, in general, materials mixed with air, excluding filamentous materialThey are installed in carpenter shops, mechanical industries, cement factories, ceramic factories, tanneries, foundries, in the mill and chemical industries, and in all those applications where it is necessary to transport harmful air with maximum temperature of 90° C.

Temperature:

90°C maximum and up to 350°C with cooling fan; the fan is painted with a special aluminium varnish suitable for high temperatures. 

TTRC Series

Low and medium-pressure centrifugal fan with open-blade impeller, design for heavy-duty works. Belt driven.
The curve of the absorbed power increases towards the free inlet and it is suggested to choose a motor with 25% power in addition, in order to rectify errors, in the assessment of circuit leaks.

Use:

suction of wooden shavings, paper offcuts and filamentous material. It is suitable in carpenter shops, tanneries, paper factories, bookbinderies and for all those applications where a normal impeller can be easily obstructed.

Temperature:

80°C maximum and up to 150°C with cooling fan.

Are you interested
in our products?

Fill out the form,
we will contact you as soon as possible.