Skip to main content
Axial fans 
low pressure
.

Euroventilatori’s low pressure axial fans are suitable for the transportation of big volume of air and are used for the aspiration of air and smokes, both in industry and civil environments.

The series

EVC Series

Transmission-drive axial-flow fan with light alloy die-cast impeller with wing-profile blades. Motor placed outside the ducting drum.

Use:

for the suction of fumes and for contaminated, dusty, damp and exhaust air.
This type of fan is mainly used in the spray booths where it offers a considerable safety guarantee against the danger of fire due to its particular construction with impeller made of spark-proof material and the motor anchored to the fan on the external part.

Temperature:

 - 20°C minimum, + 70°C maximum

EVF Series

Axial-flow fan with light alloy die-cast impeller with wing-profile blades. Double flange ducting drum. Direct driven.

Use:

for the suction of big volumes of exhaust air at low pressures. The helicoidal fans of the EVF series are suitable for the suction of smokes, as well as exhaust, dusty and damp air in the foundries, cement factories, paper factories and joinery works; for the ventilation of rooms; for drying paper, wool, pasta, tiles; in the application to radiators, unit heaters, cooling towers, etc. and where it is necessary to transport big volume of air with low pressures.

Temperature:

minimum - 20°C, maximum + 60°C.

EVL Series

Axial-flow fan with light alloy die-cast impeller with wing-profile blades. Double flange ducting drum. Direct driven.

Use:

for the suction of smokes, as well as exhaust, dusty and damp air in the foundries, cement factories, paper factories and joinery works; for the ventilation of rooms; for drying paper, wool, pasta, tiles; in the application to radiators, unit heaters, cooling towers, etc. and where it is necessary to transport big volume of air with low pressures.

Temperature:

minimum - 20°C, maximum + 60°C.

EVP Series

Axial-flow fan with light alloy die-cast impeller with wing-profile blades. single flange ducting drum. Direct driven.

Use:

for the suction of smokes, as well as vitiated, exhaust, dusty and wet air in the foundries, cement factories, paper factories and joinery works; for the ventilation room; for drying paper, wool, pasta, tiles; in the application to radiators, unit heaters, cooling towers, etc. and where it is necessary to transport big volumes of air with low pressures.

ATEX is not feasible for this type of fans due to constructional reasons.

Temperature:

minimum - 20°C, maximum + 60°C.

EVT Series

Axial-flow fan with light alloy die-cast impeller with wing-profile blades. Roof in fibreglass. Roof mounting base.

Use:

for the suction of vitiated air flue gases and vapour from the environment. They are very useful during the summer season in those environments where air changes are necessary in order to keep the room ventilated.
They are also used for the aeration of workshops, founderies, cement factories, tanneries, joineries, and for chemical mechanical and metallurgical industries where big air volumes have to be sucked at low pressure. 

Temperature:

minimum - 20°C, maximum + 60°C.

Are you interested
in our products?

Fill out the form,
we will contact you as soon as possible.